006001000100 | M-DUINO PLC ARDUINO 19R I/0s & GPRS

M-DUINO PLC ARDUINO ETHERNET 19 I/Os, ANALOG/DIGITAL/RELAY PLUS + GPRS
More Information
Complete Electronics Part No. 006001000100
Manufacturers Part No. 006001000100
Number of I/O's 19R
Description

M-DUINO PLC Arduino Ethernet & GPRS

  • Ethernet & GPRS 19R I/Os
  • Analog/Digital/Relay PLUS
  • Input Voltage: 12 to 24Vdc (Fuse protection (2.5A) Polarity protection)
  • Flash Memory: 256KB of which 8KB used by bootloader
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Arduino Board: Arduino Mega 2560

This PLC can be programmed using the Arduino IDE platform

The GPRS Controller is programmed through the USB ports.

This PLC can also be programed through Ethernet port remotely

 

 Inputs (Arduino Mega included)

  • – 5 Inputs:

    Total  Inputs (7-24Vdc): 5

    Digital Optoisolated Inputs (5-24Vdc):1

            Digital Optoisolated Inputs (5-24Vdc) | can work like interrupt Inputs INT (5-24Vdc): 1

            10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software: 4

Outputs (Arduino Mega included)

  • – 8 Outputs:

Total Outputs: 11

Digital Optoisolated Outputs (5-24Vdc): 0

Digital Optoisolated and PWM (5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch: 3

Relay Outputs: (220Va - 5A): 8

  Communication:

Ethernet communication - 1

Wi-Fi & BLE (Bluetooth Low Energy) - NO

GPRS/GSM - YES

USB port (type B) communication (for uploading or debugging only) - 1

Micro USB port (type B) communication (for uploading or debugging only) - 0

I2C communication (interface with other Industrial Shields, sensors, I/Os modules) - 1

Serial TTL (UART) communication - 1

RS-232 communication - 1

Half/Full Duplex RS-485 communication - 1

SPI external port communication (using MOSI, MISO, SS pins of Arduino) - 1

RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) - Yes

µSD Socket (using SPI port, chip select D53 pin) - Yes

 – Industrial Protocols

  •  (SIM Card not included).
  • Communications notes - * When using I2C, 2 inputs are lost

The Open Source Board CPU

Arduino Mega Original Board (ATmega 2560)

Flash Memory (KB): 256

Flash Memory of which used by bootloader (KB): 8

SRAM (KB): 8.

EEPROM (KB): 4

Clock Speed: 16MHz

Other Information

PLC measures: 101x119.5x70.1

DIN Rail mounting

Max. consum.: 1.2A

Power Supply Voltage (Vdc) Range: 12-24

 Power Consumption (VAC max.): 30

Operating Temperture C: 0C-60C

Operating Relative Humidity % (no condensation): 10%-90%

 

Country of Origin: Spain

Does Part Contain Lithium? YES

 

Product Weight: 465g max.

We pride ourselves on a superior customer service.

At Complete everyone has a vast wealth of experience in delivering the best products and service that you would expect – Put us to the test and you will not be disappointed.

CONTACT US