M-DUINO PLC Arduino, LoRa / ETHERNET

• Ethernet & LoRa (868 - 915MHz), 57AAR I/Os
• Analog/Digital/Relay PLUS
• 29 Inputs:-

  14x Analog (0-10Vdc) / Digital (5-24Vdc) configurable by software.

  15x Digital Isolated (5-24Vdc) (5 of which can work as Interrupt).

• 23 Outputs:-

. 6x Digital Isolated (5-24Vdc) / Analog  (0-10Vdc) configurable by switch.

 10x Digital Isolated (5-24Vdc)

 7x Relay (220Vac - 5A)

• Input Voltage: 12 to 24Vdc (Fuse protection (2.5A) Polarity protection
• Flash Memory: 256KB of which 8KB used by bootloader
• SRAM: 8 KB
• EEPROM: 4 KB 
• RTC (Real Time Clock. NOTE: I2C port used. See pinout modification)
• µSD Socket (using SPI port, chip select D53 pin).
• Arduino Board: Arduino Mega 2560
• Clock Speed: 16MHz
• Dimensions: 100x75x115mm

 *Rx,Tx pins are not available using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)

Communication:

• RTC, µSD, Ethernet, LoRa, USB, Full/Half Duplex RS485, RS232, I2C, Modbus

• 1x Ethernet port.

• 1x LoRa. 2 different selectable options: 868MHZ to Europe and 915MHz to America
• 1x USB port (type B).
• 1x I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)
• 3x TTL ports.
• 1x RS-232 port.
• 1x HALF/FULL Duplex RS-485 port.
• 1x SPI external port (Using MOSI,MISO, SS pins of Arduino)
• TCP IP / Modbus TCP. / Modbus RTU
• WebServer capacity
• Industrial Protocols