0012838 | ÖLFLEX® 440 P Cable, 3G1.5
Non Shielded PUR / TPE Power and Control Cable
Abrasion- and oil-resistant
Number of Conductors: 3
Conductor Diameter: 1.5mm²
Cable Outer Diameter: 7.5mm
With GN-YE Protective Conductor
Conductor material: Tin Plated Copper
Conductor design: IEC 60228 class 5:-fine wire
Core insulation: Thermoplastic elastomers (TPE)
Core identification: White numbers on black (EN 50334, VDE 0293-1)
Outer sheath material: Polyurethane (PUR)
Outer sheath colour: Grey (RAL 7001)
Nominal voltage: U0/U: 300/500 V AC rms according to IEC
Current rating according to VDE 0298-4
Test Voltage: 3kV
Temperature, fixed installation: -50°C to 90°C
Temperature, occasionally moved: -40°C to 90°C
Chemical resistant - Yes
Flame retardant - Yes acc. to IEC 60332-1-2
Halogen Free - Yes
Hydrolysis resistant - Yes
Low-adhesion sheath surface - No
MUD resistant - Yes acc. to IEC 61892-4
Oil-resistant - Yes acc. to EN 50363-10-2
Permanently immersible in water - Yes up to 10 metres @ 40°C
PWIS-free - Yes acc. to VDMA 24364-B2-L
Resistant to oil and drilling fluids
UV-resistant - Yes acc. to EN ISO 4892-2, method A
For universal use for wiring machine-internal and cross-plant control circuits
Can be used in dry, wet and, especially, harsh and oily environments
The PUR outer sheath withstands high mechanical loads
The PUR outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals
Outer sheath PUR material is resistant to abrasions, notches and cuts
Low-capacitance core insulation for long transmission paths
Flexible use at temperatures down to -40°C
Suitable for outdoor use, subject to the temperature range
Classified fire behaviour according to EU Directive 305/2011
For fixed installation and occasional flexing without tensile strain
CE marked, EAC certified, VDE certified
Reel Length= 100M
Lapp part number: 0012838