EMC-KEL-U | Split EMC cable entry frames

EMC-KEL-U | Split EMC cable entry frames

 

  • The EMC cable entry frames EMC-KEL-U are based on the KEL-U and KEL-E. Due to a conductive surface, disturbances in the cable shields on the control cabinet can be easily dissipated.
  • The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
  • The EMC-KEL-U frames match exactly the cut-out dimensions for 16- and 24-pin standard industrial connectors.
  • Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.
  • The single-row versions EMC-KEL-E are particularly suited for flat connectors.
  • The small frames are ideal for applications with limited space.
  • Between the EMC-KEL-U and the metal wall a conductive flat gasket (included) is mounted.
  • The flange surface on the metal wall must be free of paint!
  • Both conducted and field-bound disturbances can be reliably diverted
  • Scratch-resistant surface
  • Contacting the cable shield over 360°
  • EMC grommets made entirely from conductive elastomer
  • High cable density, wide variety of grommets
  • Very good dissipation values
  • Very good shielding effect with regard to EMC tightness

6 Items

Set Descending Direction
per page