KEL-ER CR Split Cable Entry Frame

Split cable entry frames for use in cleanrooms

IP66 / UL Type 12/4X

  • Split cable entry system for routing and sealing cables with connectors, providing an IP66 / UL Type 12/4X* rating
  • Strain relief for cable diameters from 1 to 16 mm (single-hole grommets KT CR 1 - 15) and 16 to 35 mm (single-hole grommets KT CR 16 - 34).
  • The KEL-ER CR frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors.
  • Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed
  • The KEL-ER-B CR frame matches the cut-out dimensions of 46 × 46 mm measuring instruments. 
  • The single-row versions KEL-ER-E CR are particularly suited for flat connectors.
  • A flat rubber gasket is included in the shipment.
  • The products with part number ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1
  • And the materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
  • The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.

 

  • IP Rating: IP66
  • Material: Polyamide
  • Flame Class: UL94-V0, self-extinguishing
  • Operating Temperature: -40 C° to 140 C°
  • Vibation Proof
  • UV-resistant
  • Silicone free
  • Anti corrosion (V2A versions)
  • Halogen free
  • Screw type mounting
  • Mounting Height: 17mm

Items 1-12 of 28

Set Descending Direction
Page
per page