You have no items in your enquiry list.

Cleanroom Cable Management

Products are broken down into the following sections, please select the section you wish to start with.

                                                                                                                                    

Cable entry systems for the use in cleanrooms

A cleanroom is a room that has an extremely low concentration of airborne particles.

Airborne particles are all particles and substances that are suspended in the air and for the most part cannot be seen with the naked eye.

icotek cable entry systems for cleanrooms are suitable and certified for class 1 in accordance with ISO 14644-1.

The products with part number ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.

The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).

The products with the part number ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.

In order to be able to meet these strict requirements, materials specially developed / modified by icotek are used in our certified clean room products.

All icotek cable entry systems for the cleanroom tested and certified by the Fraunhofer IPA

icotek recommends cleaning products installed in cleanrooms with a mixture of 70% isopropanol and 30% distilled water.

The test certificates of the Fraunhofer IPA can be requested from icotek: pm@icotek.com