20 I/O Controller Family (Ardbox)
PLC Arduino ARDBOX 20 I/Os
Includes Arduino Leonardo Board as controller.
Industrial Shields PLC are programmed using Arduino IDE, which is a software based on the C language.
Input Rated Voltage: 24 Vdc
Assembled on 35mm DIN Rail:
-
007001001200 | Controller WiFi & Bluetooth PLC - BasicController WiFi & Bluetooth PLC, 20 I/O's, 10 inputs, 10 Outputs -
107001000100 | Equipment wire (Blue) 0.75mm2Equipment wire (Blue) 0.75mm2 H050V-K, H05V-K (up to 1 mm2): 300/500 V. -
107001000200 | Equipment wire (Black) 0.75mm2Equipment wire (Black) 0.75mm2 H050V-K, H05V-K (up to 1 mm2): 300/500 V. -
107001000300 | Equipment wire (RED) 0.75mm2Equipment wire (RED) 0.75mm2 H050V-K, H05V-K (up to 1 mm2): 300/500 V. -
20 I/O's Analog HF Modbus - Arduino | 00400100120020 I/O's Analog Module - CPU Arduino Leonardo, Ardbox Analog, HF+ DALI -
323001000100 | Feed-through terminal block (Grey)Double Level Grey DIN Rail Terminal Block 500V, Connection type: Spring-cage connection, Width:5.2mm -
-
323001000300 | Feed-through terminal blockDouble Level Green / Yellow DIN Rail Terminal. 500V, Connection type: Spring-cage connection -
ARDUINO ARDBOX 20 I/Os | 015001001300PLC ARDUINO ARDBOX 20 I/Os RELAY HF MODBUS & LoRa (868 - 915MHz) -
IS.ACAMMICROB-2M | ISACAMMICROB2M | USB extension cableUSB extension cable with a configuration of USB A male to USB B male. To extend an existing connection, -
IS.ACAMUSBB-1.5M | IS.ACAMUSBB15M | USB extension cableUSB extension cable with a configuration of USB A male to USB A female. To extend an existing connection -
IS.ACANTO10-0.5k | ISACANTO1005k | DIN Rail 500 OhmsResistor for DIN Rail 500Ohms 4-20mA to 0-10Vdc ( include 1 unit), Resistor tolerance +/- 1%