Network Installation

Network installation

From patch panels and network isolators to SFP modules

Ethernet patch panels

Secure connection made fast

Ethernet patch panels enable quick and easy connection between your field and control cabinet cabling. In a covered wiring space, IDC
Push-in, or screw connection simplifies installation of the field cable.
The cable shielding is connected quickly and easily without tools – while simultaneously ensuring strain relief. This saves a great deal of time during installation.
As an option, these interface modules are also available with surge protection and shield current monitoring.

PoE Injectors

Reliable and simple supply

The Power over Ethernet (PoE) injectors can be used to supply remote Ethernet devices, such as cameras, with data and power via a shared cable.
The compact stand-alone solution is available in various performance classes up to 60 watts.
In addition to the RJ45 jack, the PoE injectors feature alternative connection technologies for the field cable and integrated surge protection.
This protects the connected end devices and therefore increases system availability.

PoE splitters

Separate data and power locally

The Power over Ethernet splitter enables you to also install non-PoE-capable end devices in remote stations easily and cost-effectively.
For WLAN or Bluetooth access points, controllers, I/O stations, etc., the PoE splitter separates data and power locally and makes these available separately.
That way, you benefit from the cost benefits and easy cabling of a PoE solution even for non-PoE-capable network components.

SFP modules

Flexible use of fiberglass technology

SFP (small form-factor pluggable) modules enable you to flexibly use the SFP ports of your Ethernet switches. Whether you require single-mode or multimode transmission, Fast Ethernet or Gigabit, Phoenix Contact provides the right SFP modules for your application:

Copper and FO transmission (singlemode and multimode)
Transmission distances up to 80 km
Single-fiber transmission with WDM technology
100 Mbps and 1000 Mbps
Can be used in all Phoenix Contact switches with SFP slots

Network isolators

For the electrical isolation of the network

In industrial environments, potential differences pose a constant problem for interference-free data transmission.
The FL ISOLATOR is used for electrical isolation in copper-based Ethernet networks.
With the high-quality isolation up to 4 kV, you can protect your Ethernet devices and interfaces. This significantly increases immunity.
The FL ISOLATOR is also available with M12 connection technology and housing for wall mounting as an option.

CABLE-USB/MINI-USB-3,0M | 2986135 | USB cable
USB connecting cable: USB plug type A to USB plug type Mini-B; length: 3 m
FL CAT5 TERMINAL BOX | 2744610 | Patch panel
Patch panel, one RJ45 jack to 4 screw connection terminal blocks (assignment 1, 2, 3, 6), CAT5e, 10/100 Mbps, DIN rail adapter, IP20
FL DIN RA | 2891053 | DIN Rail Adapter
Installed in a standard, 19-inch rack (EIA-310-D, IEC 60297-3-100) to allow DIN rail mounted equipment to be rack mounted
FL DIN-RAIL ADAPTER 22.5 | 1085485 | Mounting Plate
The FL DIN-RAIL ADAPTER 22.5 is designed to allow products 22.5 mm wide to be mounted flush to a standard 35 mm DIN rail, in any orientation.
FL DIN-RAIL ADAPTER 40 | 1085484 | Mounting Plate
The FL DIN-RAIL ADAPTER 40 is designed to allow products 40 mm wide to be mounted flush to a standard 35 mm DIN rail, in any orientation.
FL ISOLATOR 100-M12 | 2902985 | Network Isolator
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV.
FL ISOLATOR 100-RJ/RJ | 2313931 | Network Isolator
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV.
FL ISOLATOR 100-RJ/SC | 2313928 | Network Isolator
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV.
FL ISOLATOR 1000-RJ/RJ | 2313915 | Network Isolator
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV.
FL PA SFNT 5-8 | 2891012 | Mounting Plate
Mounting plate for 5- and 8-port SFNT switches, Width:140mm, Height: 130mm
FL PANEL ADAPTER 22.5 | 1085488 | Mounting Plate
The FL PANEL ADAPTER 22.5 is designed to allow products 22.5 mm wide to be mounted flush to a panel, in any orientation.
FL PANEL ADAPTER 40 | 1085486 | Mounting Plate
The FL PANEL ADAPTER 40 is designed to allow products 40 mm wide to be mounted flush to a panel, in any orientation

Shopping Options