UNITRONIC SENSOR P 4X0,34 DESINA
Flexible cable for sensor/actuator cabling
Product Design
Flexible cable design for medium mechanical stress
For fixed installation and occasional movement
Core Idendification: Colours EN 60947-5-2
Suitable for outdoor use, subject to the temperature range
Extrafine-stranded cables
Shielded: No
Without protective conductor
Number of Cores: 4
Conductor cross section: 0.34 mm²
Nominal outer cable diameter: 5.2 mm
Weight: 34 kg/km
Max. conductor temperature, fixed installation: -30 °C to 80 °C
Max. conductor temperature, occasionally moved: -5 °C to 70 °C
Max. conductor temperature, dynamic continuously flexing: -25 °C to 80 °C
Electrical / Insulation Parameters
Maximum operating voltage (not for power transmission): 300 V
Conductor material: Extrafine-stranded cables
Conductor material: Bare copper,
Core insulation: Polypropylene (PVC)
Core identification: Colours, EN 60947-5-2
Outer sheath material: Polyurethane - (PUR)
Outer sheath colour: Yellow (RAL 1021)
Product Features
Flame retardant - Yes (IEC 60332-2-2)
Halogen Free - No
Chemical resistant - No
Oil Resistant - No
UV Resistant - No
PWIS-free - Yes to VDMA 24364-B2-L
For continuous flexing - No
For torsional load No
General Information
The PVC outer sheath is resistant to acids and alkalis and has limited oil resistance
Suitable for outdoor use, subject to the temperature range
Highly flexible cable design for medium mechanical stress
Can be used in dry and damp environments
The PUR outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals
For data and signal transmission in the low-frequency range
Can be used universally at machine interfaces
EAC-certified, CE Marked
Lapp part number: 0040434
Length: 100M