We pride ourselves on a superior customer service.
At Complete everyone has a vast wealth of experience in delivering the best products and service that you would expect – Put us to the test and you will not be disappointed.
CONTACT US
21700538 | ED-CAN-AX | Lapp Cable
CAN Bus-Connectors with screw connection, Cable Outlet: 180° Axial, D-Sub plug, 9-pin, Terminating resistor (integrated) can be switched
| Complete Electronics Part No. | 21700538 |
|---|---|
| Manufacturers Part No. | 21700538 |
| Type: | CAN Bus Connector |
Description
Mechanical characteristics
Lapp part number:
21700538 / EPIC® DATA CAN Sub-D
CAN; Sub-D Socket; Straight (180 °); Switchable Bus Terminator
Description
EPIC® DATA CAN-Bus Sub-D connector
External terminal (7 – 10 mm)
9-pole
Connectors and pin layout Acc. to CAN-bus specification
Locking screw Sub-D/UNC 4-40
CAN-Bus cable interfaces Strain relief and shield connection
Termination resistor 120 Ω integrated, connectable with slide switch
Product standard, M12 connector IEC 61076-2-101
General characteristics
Suitable cable-Ø 5.0 – 8.0 mm
Wire size 0.08 – 0.5 mm2 (AWG 28 – AWG 14)
Termination resistor Activated via external switch
Transmission rate (max.) 1 Mbit/s
Temperature range 0°C to + 60°C (32°F to 167°F)
Protection class IP 20
Wire size 0.08 – 0.5 mm2 (AWG 28 – AWG 14)
Termination resistor Activated via external switch
Transmission rate (max.) 1 Mbit/s
Temperature range 0°C to + 60°C (32°F to 167°F)
Protection class IP 20
Number of poles 9
Weight Appr. 40 g
Mechanical characteristics
Dimensions 80.9 mm x 36.1 mm 14.8 mm (LxWxH)
Housing, material Zn alloy
Lifetime 200 mating cycles
Housing, material Zn alloy
Lifetime 200 mating cycles
Connector format Sub-D
Connector type Socket
CAN-Bus-cable: 6 terminals for wires up to 1.0 mm2
Assembling type: Field configurable
Metallized housing
Thread type: without
Connector pin assignment
CAN Low = Pin 2
CAN Gnd = Pin 3
CAN High = Pin 7
CAN Gnd = Pin 3
CAN High = Pin 7
General Information
The small design size make it suitable for use in limited spaces
Service-friendly screw connection enables assembly without special tools
Thanks to the integrated terminating resistors that can be switched via a slide controller
Improved protection against electromagnetic interference due to metallised housing
Also available as a "PG" variant with a second D-sub interface for programming and diagnosis
Lapp part number:
21700538