SMA Jacks
- SMA sub-miniature series are a popular general purpose high performance 50 ohm connector.
- SMA have a screw together coupling with versions available for use up to 11 GHz
- They feature gold plated bodies and centre contacts
- Reverse polarity versions are also available.
-
30-290-D10-AH | 30290D10AH | SMA Bulkhead Crimp / Crimp JackSMA 50 ohm bulkhead rear mount full crimp jack IP68 Sealed and tested to 10m unmated, Suitable for cables in group AH -
30-294-D3-HA | 30294D3HA | SMA Bulkhead Solder JackSMA 50 ohm bulkhead front mount full crimp jack, with pannel seal, Suitable for use with RG405 (0.085" semi -rigid and similar cables in group HA. -
30-348-D3 | 30348D3 | SMA Bulkhead Solder JackSMA straight hermetically sealed Contact and Flange Sealed bulkhead jack front mounted -
30-368-B3 | 30368B3 | SMA Flanged Solder JackSMA 2 hole flange mount jack. Nickel plated body and gold plated solder spill contact. -
30-368-D3 | 30368D3 | SMA Flanged Solder JackSMA 2 hole flange mount jack. Gold plated body and gold plated solder spill contact. -
30-370-D3-15 | 30370D315 | SMA Flanged Solder JackSMA 2 hole flange mount jack. Gold plated body and gold plated solder contact. with a 15mm extended dielectric -
30-372-D3 | 30372D3 | SMA Flanged Solder JackSMA 1/2" Square 4 hole flange mount jack. With a 0.15 mm thick Tab Contact for mounting to a PCB, Body and Contact are gold plated. -
30-373-H3-2.8 | 30373H328 | SMA R/A Flanged Solder JackSMA Stainless Steel Right Angle 1/2" Square 4 hole flange mount jack. With a 1.27mm Diameter Solder Post Contact With 2.8 mm Extended Dieletric -
30-375-D3 | 30375D3 | SMA 4 Hole Flanged Solder JackSMA 1/2" Square 4 hole flange mount jack. With a 0.8mm Dia Solder Receptacle Contact for direct Mounting onto a Cable, Body and Contact are gold plated. -
30-390-D3-1.57 | 30390D3157 | SMA End Launch Jack, 1.6mmSMA end launch PCB jack. Suitable for soldering to a 1.6mm thick PCB, the centre line of the SMA is aligned to the PCB. Contact and body are gold plated. -
30-410-1-D3 | 304101D3 | SMA End Launch Jack,SMA end launch PCB jack Suitable for soldering to a PCB with through holes. Contact and body are gold plated. -
30-410-D3 | 30410D3 | SMA End Launch Bulkhead JackSMA end launch PCB jack Suitable for soldering to a PCB with through holes. Contact and body are gold plated, Supplied complete with nut and lock washer.